RTSP and HTTP URLs
RTSP without Authentication (NVR/DVR/IPC/Encoder)
rtsp://<IP address of device>:<RTSP port>/Streaming/channels/<channel number><stream number>
NOTE: <stream number> represents main stream (01), or the sub stream (02)
Example:
rtsp://173.200.91.70:10554/Streaming/channels/101 – get the main stream of the 1st channel
rtsp://173.200.91.70:10554/Streaming/channels/102 – get the sub stream of the 1st channel
RTSP with Authentication
rtsp://<username>:<password>@<IP address of device>:<RTSP port>/Streaming/channels/<channel number><stream number>
Example:
rtsp://Hikvision:[email protected]:10554/Streaming/channels/1701 – get the main stream of the 17th channel (1st IP camera on the Hybrid Demo)
rtsp://Hikvision:[email protected]:10554/Streaming/channels/1902 – get the sub stream of the 19th channel (3rd IP camera on the Hybrid Demo)
HTTP commands to get IPC MJPEG stream
1. Camera firmware need to be v4.1 or higher
2. Can only stream the Sub stream via HTTP
3. Need to change the Sub stream video encoding to MJPEG
4. Resolution can be changed via web interface
NOTE: If the HTTP port of the device is still 80 (default), then “:<HTTP port>” is not required.
HTTP without Authentication
http://<IP address of IPC>:<HTTP port>/Streaming/channels/102/httpPreview
HTTP with Authentication
http://<username>:<password>@<IP address of IPC>:<HTTP port>/Streaming/channels/102/httpPreview
Snapshot using HTTP URL
http://<IP address of IPC>:<HTTP port>/Streaming/channels/1/picture
Example:
http://192.0.0.64/Streaming/channels/102/httpPreview http://admin:[email protected]/Streaming/channels/102/httpPreview
http://192.0.0.64/Streaming/channels/1/picture